Show us your cooking skills in the 12th Cooking Contest, Meats/Fish!
Deadline to enter is August 20th at 4 PM EST.
Vote for the entries of the Alley's Writing ContestHere!
The deadline for critiques Ends at August 4th.
Come enter in the Dragon Ball Drawing Contest!
Deadline for entries is August 17 at 12 pm UTC.
Dismiss NoticeWelcome to the forums! Take a second to look at our Beginner's Guide. It contains the information necessary for you to have an easier experience here.
Thanks and have fun. -NF staff
Viewing blog entries in category: Bleach Calculations
Spoiler:There is a reason why I don't calc any feat anymore. It's not cause of scaling. That part is not hard. Its cause I have to write a big ass essay explaining cause people are dumb. Anyway,I have time in my hand cause I bunked my class. So here goes.
There is one assumption I had to make. Floating cities where royal guard resided remained same size after Yhwach altered it.
Eyeball creatures fell to soul society in a single line. There wasn't any change in the diameter of the line. First since there is no panel to calc the lines diameter straight from an existing known size I am going to use the formula below to calc its radius pixel. So,
W = 724
H = 77
So, R = (H/2)+(W^2/8H)
R = 889.4350649 pixel
So Radius of Seretei = 889.4350649 pixel = 9.6775 kilometers
Eyeball creatures line = 11pixel = 119.68552 meter
Now that I have lines diameter I am going to use it to scale palace of soul king.
Again Eyeball creatures line = 6 pixel = 119.68552 meter
Greater Soul King Palace = 29 pixel = 578.48002 meter
Greater Soul King Palace = 47 pixel = 578.48002 meter
Floating City Diameter = 286 pixel = 3520.1124 meter
Now lets calc the destruction volume of the attack. Scaling the diameter of the city from below I got two size. I am going to use the average.
Floating City Diameter = (95+103)/2 or 99 pixel = 3520.1124 meter
Destroyed part diameter = (45+42)/2 or 43.5 pixel = 1546.7160 meter
Destroyed part radius, r = 773.35804 meter
Destroyed part depth, h = 18 pixel = 640.0204 meter
I am going to use half cylindrical volume formula for it.Not like the one you are thinking. The shape is more like this image. Either green or blue part.
Destroyed volume = pi*r^2*h/2 = 601277478.42422 meter^3
This clerly seems pulverization so I will use 214.35 j/cc.
God's Trumpet DC = 128883827500231749.93885 Joules
Not as impressive number wise I know.
God's Trumpet DC = 30.80397 Megatons of TNT
Spoiler:I know this was done already but I found a better scan to scale the crater rather than the previous scan. Lets get to it.
First I am going to to scale the craters length & width from the execution stand.
Stand height - 27 pixels - 46.08 meter.
Crater Length - 116 pixels - 197.9733 meter.
Crater Width - 31 pixels - 52.9066 meter.
Now we need depth. You won't be able to gauge the depth from the above scan so I am scaling from another.
Crater Length - 116 pixels - 197.9733 meter.
Crater Depth - 44.68 pixel - 76.2671 meter.
The Crater is triangular prism shame. So,
Volume = .5*l*w*d
Volume = 399415.3630 m^3
As seen from the scan rock was thoroughly pulverized.We know pulverization energy is 214.35 j/cc.
Tengen Energy = 399415.3630*1000000*214.35
Tengen Energy = 85614683067153.6460 Joules
Tengen Energy = 20.462400351 kilotons of TNT
Tengen Energy = 20.4624 kilotons of TNT
This calc is fairly simple.It doesn't need much explanation either.Hitsugaya threw his Ice dragon towards Hallibell which she turned to water.See? Pretty simple.
First I am going to calc the width of that Ice dragon.Luckily for me Sables already did that here.
Ice Dragon width = 2.13 meter.
Now the dragon in the scan is kinda shaped like a spring but not totally.So I am going to calc the volume in three step.First I am going to calc the lower part which is not spring shaped.Then middle part which is spring shaped & lastly but not least its tail.
Ice Dragon width = 19 px = 2.13 meter.
Ice Dragon Head Length First part = 48.8773 px = 5.47941 meter.
Ice Dragon Head Volume First part V1 = (1/3)*pi*r^2*h = 6.508215 m^3
Ice Dragon Head Length Second part = 67.4759 px = 7.5644 meter.
Ice Dragon Head Volume Second part V2 = pi*r^2*h = 26.95404 m^3
Ice Dragon Tail Width = 13 px = 1.45736 meter
Ice Dragon Tail Length = 81.8840 px = 9.1796 meter
Ice Dragon Tail Volume V3 = (1/3)*pi*r^2*h = 5.1042 m^3
Ice Dragon nominal coil diameter D = 71 px = 7.9594 meter
Ice Dragon wire diameter d = (16+26+23)/3 px = 21.66 px = 2.4289 meter.
Number of coil n = 4
Ice Dragon Spring Volume V4 = (pi*d^2/4)*pi*D*n
Ice Dragon Spring Volume V4 = (pi*2.4289^2/4)*pi*7.9594*4
Ice Dragon Spring Volume V4 = 463.44622 m^3
Total Volume = V1 + V2 + V3 + V4 = 502.0126767 m^3
Density of Ice = 917 kg/m^3
Mass of Ice Dragon m = 460345.62454 kg.
Specific Heat of water C = 4186 J/kg
Latent Heat of Water L = 334880 J/kg
Now melting point of Ice is 0 degree.At minimum the temperature difference is 0 degree but If I plug it in the quation then I get the 0 as result.Since we don't know the extent of temp change I am going to assume its atleast 1 degree.
Temperature change = 1 degree.
Q1 = 460345.62454*4186*1
Q1 = 1927006784.3466 Joules
The matter changed phase so latent energy as well.
Q2 = 460345.62454*334880
Q2 = 154160542747.73341 Joules
Total Energy = Q1+Q2 = 156087549532.080085 Joules
Total Energy = 37.3058 tons of TNT.
Melting the Dragon = 37.3058 tons of TNT.
Apparently because of my boredome I was going through few old calcs & found Fluttershy's Juubi blog & Night's Lanza blog.
In Juubi blog I found Flutter used Cone surface for Juubi's BB. I also discovered Night used hemisphere though Lanza did not produce such shape at all.It produced rather cone like shape.
Then I thought to myself what would be the result if I use Cone surface area to find energy.
I will be using Night's value since I am quite lazy these days despite I have nothing to do.
Now here,Explosion diameter 220 px = 5,660.326 meter
Height 542 px = 13944.98496 meter
Surface area of a cone = pi*r*l = 123987919.297147305 m^2
Lanza Yield = 123987919.297147305*1316315296.430069548619 Joules
Lanza Yield = 163207194743371995.22301042119 Joules
Lanza Yield = 39.007455723 Megaton.
Wow now thats a big number.
Lanza Yield = 39.007455723 Megaton.
Spoiler:Allright then since you guys already know the method so I won't bother explaining.Lets cut to the chase.
Ichigo = 165 px = 1.81 meter
Door = 210 px = 2.303636 meter.
Now again in this pictuure,
Door = 27 px = 2.303636 meter.
Shed Width = 73 px = 6.2283501 meter
Ichigo = 33 px = 1.81 meter.
Window Width = 110 px = 6.0333333 meter.
This one I didn't scale,stole it from Darth. Here,
Window width = 7.07 px = 6.033333meter
Diameter of destruction = 953.9 px = 814.030641 meter.
I need to substruct the rock formation so I'm just gonna calc that pier as a triangular prism.
Shed Width = 12.7 px = 6.2283501 meter
Base = 138.8 px = 68.0704719 meter
Length = 301 px = 147.616801 meter
Initial water level was only up to the height of those "windows" in the cliff cause otherwise the water would be constantly pouring in through those "windows", flooding everything.
Now here, Window width = 7 px = 6.0333333 meter
Height Up to window bottom = 95 px = 81.8809523809 meter.
So now Volume of AOE = pi x 81.8809523809 x 407.0153207^2 = 42614193.3705629198 m^3
Volume of Rock = .5 x 81.8809523809 x 68.0704719 x 147.616801 = 411384.041689780 m^3
Volume of Water = 42614193.3705629198 - 411384.041689780 = 42202809.328873139 m^3
Mass of Water = 42202809328.87313986081782 kg
According to Flutter the energy per Kg to vape water is 2615810 J
Water Vaporizing energy = 110394530670559647.9793258617342 J = 26.384926068 Megatons
Vaporizing Sea = 26.384926068 Megatons
Urahara = 59 px = 183 cm.
Rock Height = 241 px = 747.50847457627184 cm.
Again for bedrock,
Here Rock formation Height = 747.50847457627184 cm
Slash Width = 487 px = 836.86580946814801397578 cm
Uarahara = 22 px = 183 cm
Depth = 185 px = 1538.863636363636 cm.
Now Panel Height = 591 px
Distance from Urahara = Slash Length = 3510.4 cm [Angular Method]
Volume = 2260385811.022540 cm^3
Energy = 115.801553201 tons.
GT = 115.801553201 tons.
This one scalling is actually done by crimsonshade. I promised him that I will look into it but I am a bit busy with my studies. So I am leaving it to you guys to decide.
Another blog to tie up few knots. Original Blog is made by Chaos.This one is using new angsize. I could have posted there but its too crowded.
I also used his scalling except for the first one cause I am way too lazy to scale the whole lot of them.
Based on Chaos observation the shit is atleast 2000 meter away.
Panel Width = 623 pixels
Fragor Diameter = 109 pixels
Panel Height = 344 pixels
Distance Away = 2,000 meters
2*atan(tan(70/2)*(Panel_Width/Panel_Height) = 103.48306407191231
2*atan(Object_Size/(Panel_Width/tan(FoV/2))) = 25.01894121845834277098
Fragor Diameter = 887.47 meters
Crater Depth = 1/4 D = 221.8675 meter
Fraggor cylinder = PIr^2*H
Crater Volume = 137243230.8788586036337 m^3
Fragor Energy = 29418086538883341.688883595 joules
= 7.031091429 megatons
Dangai Ichigo's Swing
Crater Radius = 454 pixels
Hill Height = 158 pixels
Hill Height/Crater Radius = 0.348
Hill Height = 154.41978 meters
Hill Height = 436 pixels
Hill Top = 302 pixels
Hill Diameter = 439 pixels
Hill Top/Hill Height = 0.693
Hill Diameter/Hill Height = 1.007
Hill Top = 107.01290754 meters
Hill Diameter = 155.50071846 meters
Large Hill Diameter = 466 pixels
Small Hill Diameter = 275 pixels
Small Hill Diameter/Large Hill Diameter = 0.59
Small Hill Diameter = 91.7454238914 meters
Cone = (PIr1r2*H)/3
Hill Volume = 799376.9068997825712016333333 m^3
Energy of Shockwave = 171194558381657.435448541794659528 joules
= 40.916481449 kilotons
Mugetsu Cut Width = 8 pixels
Crater Radius = 279 pixels
Crater Radius/Mugetsu Cut Width = 0.029
Crater Radius = 443.735 meters
Mugetsu Cut Width = 12.868315 meters
It is faulty to find a width from a perspective as far out as the horizon anyway, what with the whole weird perspective and black ink attack obscuring our vision.
Our height of eye seems like it could be about the height of the hill in the area, so...
Height of Eye = 154.41978 meters
Horizon = 44.3825371 km.
Depth of cut is depth of crater.
Cut Volume = 126714845.35224398978875 m^3
Using 214.35 j/cc for pulverization.
Mugetsu Energy = 6.4917 Megaton[/B]
Fragor Energy = 7.0310 megatons
Ichigo's Shockwave = 40.9164 kilotons
Mugetsu Energy = 6.4917 Megaton
Spoiler:Yama-ji basically created Nimbostratus cloud above Soul Society. These clouds are usually 2400 meter above ground. Since the vapor formed the cloud I would assume he vaporized up to 2400 meter.
So ,Radius r = 336.83 kilometer.
height h = 2.400 kilometer.
Cylinder Volume = Pir^2h = (336.83*1000)^2*2400*pi
Cylinder Volume = 855426391635164.6364 m^3
This manga is written by a Japanese & the chapter was published in September. So I am going to use average temperature of September month.
I am going to use these two site as reference.
Average Temperature in September = 24 Degree Celcius.
Humidity at 24 Degree = 12.1 g/m^3
Mass = 855426391635164.6364*12.1 g
Mass = 10350659338785492.1014 g
Mass = 10350659338785.4921 kg
Vaporization of water = 2615810 J/kg
Energy = 27075358204988478093.88981 Joules
Energy = 6.4711 Gigatons
Now if side effect is this much just by releasing his Bankai then why not North?
Side effect = 6.4711 Gigatons.
Spoiler:I am going to approach this feat a little differently.
Spoiler:The sun heats the ground and warm air rises.As the air rises it cools and water vapour condenses to form clouds.When the condensation point is reached large cumulonimbus clouds are formed.Heavy rain storms occur. These usually include thunder and lightening due to the electrical charge created by unstable conditions.
More or less same shit happened after Yama-ji released his Bankai.
Spoiler:Convective heat transfer.
Q = hA(Ts ? T)
Q = Heat flow in input or lost heat flow, J/s = W
h = Heat transfer coefficient, W/m2/K. = 10 to 100 W/(m2K)
A = Heat transfer surface area, m2 = 1.56 m^2
Δ T = Difference in temperature .
Q = hA(Ts ? T)
= 100 x 1.56 x (15000273-297.15)
= 2339996232.6 Watt
= 0.559272522 tons/second.
Not too great huh.
Spoiler:Well, now because of odd prospective I thought of calcing this way. Now I don't know to calc it more accurately. So some input would be nice.
Now the prospective looks kinda like this to me.
Where Yama-ji stands at X & the person witnessing it at Y. Its obvious from the scan is that crater reaches far behind the the person to Z.
Now Yama Ji = 12 px = 1.68 m.
Height = OX = 138 px = 19.32 m.
Panel Width = 380 px
Panel Height = 492 px
Using Angular Method,
Yama-ji = 1.9568310712891759062 Degree.
So XY = 49.185 meter.
Now, OY = 45.2316462777998
Safe assumption of mine is OY covers at least 2/3 of OZ.
So OZ = 67.8474694166997 meter.
Crater reflects Triangular Prism.
Because of odd prospective I am going to use average width = 43.58373470834985 meter
Here Length = 67.8474694166997.
Height = 19.32 meter.
Volume = 28565.06540028848798204747 m^3
Vaporizing is likely what happened here.
So DC = 209.2 kilotons
Bankai East = 209.2 kilotons
Here,Ulquora is 11 px = 169 cm [Databook]
Pillar Width = 200 px = 3072.7272 cm.
I am gonna guess that every pillar has more or less same diameter which seems reasonable to me.
Now Pillar = 3 px = 3072.7272 cm
Building height = 64 px = 65551.5151 cm.
Now as per I have said above.
Wall height = 25 px = 65551.5151 cm.
Lanza Del Relampago Explosion Diameter = 285 px = 747287.2727 cm = 7472.872727 meter.
Using Total Fatalities, I get = 2.58 megaton.
Lanza Del Relampago Explosion Diameter =7472.872727 meter.
Lanza Del Relampago Yield = 2.58 megatons
Kurodone = 46 px = 1.72 meter [Databook]
Pillar Width = 457 px = 17.087 meter.
Panel Height = 493 px
Panel Width = 423 px
Pillar Width = 8 px.
Again new method,
2*atan(Object_Size/(Panel_Width/tan(FoV/2))) = object degree size
2*atan(8/(423/tan(61.99376692255286 /2))) = 1.30197842925157296827
So using this I get 751.91 meter.
Stark's speed [Orihime Edition]
Spoiler:Just throwing this for fun.
Using what willy used in his calc.120 fps is what "high-speed cameras" are using to film heated action-heavy scenes.
751.91/(1/120) = 90229.2 m/s = Mach 265.38
Now it has been said that Yama-ji Shikai would destroy whole Fake Karakura town.Even though he didn't do it I am going to calc how much energy it would take to do so. I am going to follow the method GM used to get DC of Millenium Earl.
I going to take this number stated here as radius of FKT.
Time to get the number. Now as we saw in the panel I think its safe to assume it would be fragmentation.
So size of Karakura Town = 61685316 m^2
There are hundreds of Skyscrappers in FKT. Assuming each building is 10m tall, or basically extruding 10m upwards we can work out a really rough estimate of what we're dealing with here.
61685316 x10 = 616853160 m^3. Could be higher or lower.
Using this calculator I get 1.2 Megatons for fragmentation (igneous rock).
Using Fragmentation for concrete 8 j/cc I get = 1.179451549 megaton.
Fragmentation = 1.18-1.2 Megaton
Violent Fragmentation = 1.47 Megaton
Pulverization = 2.06 Megaton
Nuke Calculator [Air blast radius]= 3 Megaton
Nuke Calculator [Fireball radius (ground-contact airburst)] = 76 Megaton
I think I can get away with saying those houses are at least 10 meter width.
Here House Roof = 27 px = 10 m
So AOE of attack =
Width = 427 px = 158.14 meter.
Height = 128 px = 47.407 meter.
Just a rough calc out of boredom
Renji = 78 px = 188 cm
Pillar = 454 px = 1094.2564 cm.
Pillar = 25 px = 1029.2564 cm
Went flying = 635 pixel = 26143.11 cm = 261.431m.
Probably destroyed building & such = 401 px = 17551.8725 cm = 175.51 meter.
So Renji went flying for 175 meter. Not bad for a fodder who wanted to beat Aizen .
Now I didn't get the accurate height for Pillar. So I am going to use width like Zenith suggested.
Here Width of pillar is = 100 px or 241.0256 cm.
Here Width of pillar is = 6px
Destroyed building for = 671 px = 26954.6962 cm = 269.5469 meter.
Not a bad result,is it?